15921758826
Shanghai Weitao automation equipment Co., Ltd
Contact person: Mr. Lu
Tel: 15921758826
Address: 2312 Weiqing East Road, Shanyang Town, Jinshan District, Shanghai
The wear-resistant testing machine is used to test the wear-resistant performance of the sole of the finished shoe and the molded sole (piece).
Controlled by servomotor, extremely stable control speed is obtained without human intervention to adjust the speed.
The standard grinding wheel has passed the test by the National footwear product testing center.
Meet: GB/T3903.2-2008 and other standards.
Detailed instructions
Hy-763gb China national standard wear-resistant testing machine product technical specifications
Meet GB/T3903.2-2008 and other standard requirements
A. Grinding wheel speed: 50 ~ 300r/min, variable frequency stepless speed regulation
B. Grinding wheel specification: 20×6mm T12 steel grinding wheel
C. Pressure: 19.6N
D. Timing range: 1S ~ 99min59s
E. Speed measurement range: LCD LCD display at 1 ~ 9,999 RPM
F. Scale specification: 5000g
Hy-763 GB China National Standard abrasion resistance testing machine product features:
A. Controlled by servo motor, it can reach the rated speed immediately after starting (without pre-heating waiting). The grinding wheel speed error is within 1r/min, and there is no need for human intervention to adjust the speed error.
B. The grinding wheel shall be compared and tested by the National Footwear Testing Center and issued with a certificate to ensure the accuracy of the test (the National Footwear testing Center is the national inspection and acceptance unit for abrasion resistance testing of shoes).
Hy-763 GB China national standard wear-resistant testing machine product configuration
A. One standard grinding wheel (issue the calibration certificate of national Footwear Testing Center)
B. One set of product specifications and one CNAS internationally recognized calibration report shall be issued
The liability shall be limited to the repair or replacement of any defective parts arising on board or during ex works delivery.
There is no warranty for damage to instruments or components caused by misuse, misuse, accident, alteration, neglect, or unauthorized repair or installation.
Zui has the final decision on defect identification and cause.
After the parts have been repaired or replaced, the warranty under the warranty shall continue to be valid for 6 months from the original warranty period or the date of the spontaneous credit of the equipment, subject to the longer period.
The company reserves the right to make changes and improvements to its products, but has no obligation to perform improvements and installations on products already produced.
1.3 Parts Warranty
The supplied parts and materials have been inspected and tested to ensure that they are free from defects and defects and that they will work normally when properly installed and operated on the instruments manufactured.
The warranty period for components (excluding expendable components such as light sources, optical elements, friction cloth, etc.) is 6 months from the first delivery date.
This warranty is in lieu of any other warranty, express or implied.
In no event shall it be liable and liable for any special or consequential damages arising out of any breach of this Warranty.
The liability shall be limited to the repair or replacement of any defective parts arising on board or during ex works delivery.
There is no warranty for damage to components caused by misuse, misuse, accident, alteration, neglect, unauthorized repair or installation.
Zui has the final decision on defect identification and cause.
The company reserves the right to make changes and improvements to its products, but has no obligation to perform improvements and installations on products already produced.
1.4 Operating environment
The instrument is used in residential, commercial and light industrial environments in accordance with standards BS EN 50081-1 and BS EN50082-1
1.5 Climatic Environment
The company shall have the right to make changes and improvements to its products, but shall have no obligation to perform improvements and installations on the products already produced.
The instrument is operated under the following conditions:
Elevation & lt;
2000m
Operating temperature: 13 ~ 30℃(56 ~ 86℉), relative humidity 25 ~ 75%
Storage temperature: 10 ~ 43℃(50 ~ 110℉), relative humidity 20 ~ 80%
The instrument can be placed in a standard operating environment to ensure consistency between sample humidification and actual wear test.
1.6 Electrical Information
This instrument meets the electrical requirements of EN 61010-1:2001 for measurement, control and laboratory use.
1.7 Installation type and pollution level
Install category Ⅰ
Pollution level 1
1.8 Warning labels
Founded in 2011, Shanghai Huitao is a team of experienced engineers and emerging design experts. The company focuses on R & D, design and production of high quality laboratory instruments for textile testing. Headquartered in Shanghai, the company provides high-quality testing instruments and high-quality professional services for companies, academic research institutions and testing institutions of various countries.
Shanghai Huitao continuously launched products to meet the experimental needs of the textile industry. It has advanced microclimate comfort test equipment, such as thermal manikin, thermal and humidity resistance tester, MMT and other test equipment. Meanwhile, it also provides air permeability tester, hydrostatic pressure tester and thermal protective clothing performance test equipment required for new product development. In addition, we have developed and produced many basic textile testing instruments, including washing color fastness tester, fabric abrasion tester, pilling tester, rubbing color fastness tester, ironing fastness tester and perspiration color fastness tester. These high-quality products are widely used in textile testing field. In order to meet the experimental needs of users, we also provide you with innovative and practical testing instruments. The products include fiber tester, yarn tester, fabric tester, carpet tester, geotextile tester and other related testing equipment.
The company sells our products through distributed distribution partners who provide high-quality products, services and support to our customers all over the world. All the products are in line with international quality standards and specifications, and can perform outstanding and accurate product performance.