Moisture resistant microbial penetration tester

Purpose of zipper tensile testing machine

This tension machine is suitable for the experiment of finding the relationship between material force and deformation. It can carry out many mechanical experiments and analysis such as stretching, bending, stripping, compression, compression, adhesion and tearing on the raw material, workpiece and finished product of metal and non-metal.

Ii. Technical Indicators:

1. Zui heavy load: 1KN(100KG)

2. Effective test space: height: 600mm

3. Single option: Gf, Kgf, N, KN, LB, Mpa(optional according to needs)

4. Induction mode: Transcell Force transducers of 1KN are selected

5. Power system: Panasonic servo group + Professional Panasonic AC servo controller

6. Force resolution: ±1/500000

7. Measuring force scope: 04%-100%(full range)

8. Precision of measurement: ±0.5% of the indicated value

9. Displacement resolution: 0.05mm(Note: this type of equipment has built-in deformation device, which is more convenient and helpful for measuring physical properties of elastic and plastic deformation of metal or non-metal materials and various composite materials)

10. Displacement measurement accuracy: within ±0.5% of the indicated value (high-precision displacement sensor tracking test is adopted)

11. Deformation resolution: ± 1/300000F.s (full resolution unchanged)

12. Deformation measurement range: 0.2%-100% F.S.

13. Deformation indication error: within ±0.5% of the indication value

14. Test speed control range: 0.001-500 mm/min segmented control, stepless speed regulation

15. Test speed control accuracy: speed & LT;

At 0.01mm/min, it is within ±1% of the set value;

When the speed is ≥0.01mm/min, it is within ±0.5% of the set value;

16. Force control rate range: 0.5% ~ 6%FS/S

17. Force control rate accuracy: within ±1% of the set value

18. Deformation rate range: 0.2% ~ 6%FS/S

19. Deformation rate accuracy: rate & LT;

When 0.05%FS, is within ±1% of the set value;

When the rate ≥0.05%FS, it is within ±0.5% of the set value;

20. Power source: AC 220V 50HZ

23. A set of special Chinese-English test software (to be modified or upgraded at any time according to customer requirements without any charge)

Iv. Product configuration

Force transducers imported to Transcell force transducers

Taiwan ABBA high carbon screw

Guide rod made from Korea tajin guide rod, the surface is processed by high temperature and hard chrome electroplating, HRC60 or above

Dust control device Taiwan anti-stack dust cover, protection screw;

Extended service life

Control system Panasonic control system Japan

Display mode touch screen operation, can connect PC and printer, can output curve graph report

1.3 Parts Warranty

The supplied parts and materials have been inspected and tested to ensure that they are free from defects and defects and that they will work normally when properly installed and operated on the instruments manufactured.

The warranty period for components (excluding expendable components such as light sources, optical elements, friction cloth, etc.) is 6 months from the first delivery date.

This warranty is in lieu of any other warranty, express or implied.

In no event shall it be liable and liable for any special or consequential damages arising out of any breach of this Warranty.

The liability shall be limited to the repair or replacement of any defective parts arising on board or during ex works delivery.

There is no warranty for damage to components caused by misuse, misuse, accident, alteration, neglect, unauthorized repair or installation.

Zui has the final decision on defect identification and cause.

The company reserves the right to make changes and improvements to its products, but has no obligation to perform improvements and installations on products already produced.

1.4 Operating environment

The instrument is used in residential, commercial and light industrial environments in accordance with standards BS EN 50081-1 and BS EN50082-1

1.5 Climatic Environment

The company shall have the right to make changes and improvements to its products, but shall have no obligation to perform improvements and installations on the products already produced.

The instrument is operated under the following conditions:

Elevation & lt;

2000m

Operating temperature: 13 ~ 30℃(56 ~ 86℉), relative humidity 25 ~ 75%

Storage temperature: 10 ~ 43℃(50 ~ 110℉), relative humidity 20 ~ 80%

The instrument can be placed in a standard operating environment to ensure consistency between sample humidification and actual wear test.

1.6 Electrical Information

This instrument meets the electrical requirements of EN 61010-1:2001 for measurement, control and laboratory use.

1.7 Installation type and pollution level

Install category Ⅰ

Pollution level 1

1.8 Warning labels