Moisture resistant microbial penetration tester

This machine is suitable for many kinds of connector plug life test, the speed stroke can be adjusted, and display the speed value, it can be said that the current market high cost performance plug life testing machine, without digital force value display, with set counting function, to achieve the number of stops, beautiful and generous structure.

The main parameters

1. Power supply voltage: 220V±10%

2. Frequency range: 0 ~ 999999

3. Speed range: 6 ~ 60 times/min

4. Stroke adjustment range: 0 ~ 6cm

5. Machine weight (approx.) : 40kg

6. Machine size: 500×450×550mm

Equipment purpose:

The microcomputer plug and pull force tester is suitable for testing the fatigue life of inserting and pulling out of tablet computers, various connectors, plug sockets and other products.

Taiwan AC motor as the power source, reliable quality, durable use;

Equipped with a special clamping fixture to plug and pull the connector (device), the linear guide rail greatly reduces mechanical friction and noise;

The electric plug and pull life testing machine has the frequency setting, the speed stroke is adjustable, the display speed value, the rotating eccentric wheel power design, causes the test speed and the test stroke not to have the correlation, the long, the short stroke connector, the test is also fast.

Suitable for plug and pull life testing machine.

Main technical indicators: plug and pull force life testing machine, plug and pull force testing machine, micro electric horizontal plug and pull force life testing machine

1. Frequency range: 0~999999

2. Transmission mode: rotate eccentric wheel

3. Display mode: LED real-time display

4. Insertion and pulling force range: 0~50kg

5. Stroke adjustment example: 0~70MM

6. Test speed: 3~60/ min (digital display)

7. Machine size :550(D) * 470(W) * 450(H)mm

8. Working voltage: single-phase 220V

9. Main circuit fuse block: 2A

10. Fixture: Special test fixture

This warranty is in lieu of any other warranty, express or implied.

In no event shall it be liable and liable for any special or consequential damages arising out of any breach of this Warranty.

The liability shall be limited to the repair or replacement of any defective parts arising on board or during ex works delivery.

There is no warranty for damage to components caused by misuse, misuse, accident, alteration, neglect, unauthorized repair or installation.

Zui has the final decision on defect identification and cause.

The company reserves the right to make changes and improvements to its products, but has no obligation to perform improvements and installations on products already produced.

1.4 Operating environment

The instrument is used in residential, commercial and light industrial environments in accordance with standards BS EN 50081-1 and BS EN50082-1

1.5 Climatic Environment

The company shall have the right to make changes and improvements to its products, but shall have no obligation to perform improvements and installations on the products already produced.

The instrument is operated under the following conditions:

Elevation & lt;

2000m

Operating temperature: 13 ~ 30℃(56 ~ 86℉), relative humidity 25 ~ 75%

Storage temperature: 10 ~ 43℃(50 ~ 110℉), relative humidity 20 ~ 80%

The instrument can be placed in a standard operating environment to ensure consistency between sample humidification and actual wear test.

1.6 Electrical Information

This instrument meets the electrical requirements of EN 61010-1:2001 for measurement, control and laboratory use.

1.7 Installation type and pollution level

Install category Ⅰ

Pollution level 1

1.8 Warning labels