15921758826
15921758826
Shanghai Weitao automation equipment Co., Ltd
Contact person: Mr. Lu
Tel: 15921758826
Address: 2312 Weiqing East Road, Shanyang Town, Jinshan District, Shanghai
Uv Sterilizer Product Description:
Ultraviolet disinfection technology is a generation of disinfection technology emerging in the late 1990s.
It integrates optics, microbiology, electronics, fluid mechanics and aerodynamics into one. It is characterized by high efficiency, broad spectrum, low cost, long life, large water volume and no secondary pollution. It is the internationally recognized mainstream consumption technology in the 21st century.
It is mainly used to sterilize cooked food and water.
Widely used in hospitals, food, Chinese herbal medicine, food and beverage processing and packaging equipment, health products factory, food factory, milk factory, brewery, beverage factory, bakery and packaging products factory, etc.
The operating principle of the equipment is: the ultraviolet sterilization band is mainly between 200 and 300nm, among which the sterilization ability of 253.7nm wavelength zui is strong.
When all kinds of bacteria and viruses in water or air through area (253.7 nm wavelength) exposure to the sun's ultraviolet rays, ultraviolet light penetrates the cell membrane and nucleus of microorganism, destruction of nucleic acids (DNA or RNA) molecular bonds, make its losing the ability to replicate or lose their activity and death, and in the case of without using any chemicals to kill all the bacteria and viruses.
Sterilization lamp do not need to be converted to visible light, 100-200 nm wavelength can have very good sterilization effect, this is because the cells of light absorption lines there is a rule, in 100-200 nm uv zui large absorption, uv actually is absorbed on the cellular genetic material or DNA, it plays a allochromatic, ultraviolet photons energy absorbed by the base pairs of DNA, cause mutation genetic material, make the bacteria died instantly or cannot reproduce, achieve the purpose of sterilization.
Advantages of ULTRAVIOLET disinfection technology:
Ultraviolet C disinfection technology has been recognized all over the world for its disinfection effect on bacteria, viruses and other pathogenic bodies. It has incomparable bactericidal efficiency compared with other technologies.
Ultraviolet ray's bactericidal action to bacterium, virus is in a second commonly less than.
For the traditional LVQI and ozone methods, it generally takes 20 to 50 minutes to achieve the ultraviolet sterilization effect.
It has the characteristics of efficient sterilization, wide spectrum, no secondary pollution, safe and reasonable design, safe and reliable operation.
Simple operation and maintenance, low cost.
This equipment occupies a small area and has no noise.
Continuous mass sterilization.
A wide range of applications and many other advantages.
Maintenance of uv sterilizer:
Check regularly to ensure the normal operation of UV lamp.
2. Replace the ULTRAVIOLET lamp after 8000 hours or one year of continuous use.
When replacing new lamp tube, pull out lamp socket first, take out ultraviolet lamp tube.
Be careful not to touch the quartz glass of the new lamp tube with your fingers, because the stain will affect the intensity of the light, and carefully put the lamp tube into the chamber of the sterilizer.
Product parameters (according to customer requirements) :
1. Full length of equipment: 2000mm
2. Working area length: 1000mm
3. Feeding area: 500mm Discharging area: 500mm
4. Entrance and exit height: 200mm
5. Conveyor belt width: 500mm
6. Conveyor belt from the ground: 750±20mm
7. A total of 16 lamp tubes are installed in the sterilizing machine, each power: 20W
Main product configuration and construction:
1. Outer body of tunnel in working area: high-quality 304 yarn surface stainless steel
2. Working area tunnel cavity: mirror stainless steel model: #304
3. Body support frame: Fangtong Steel one set model: 2 "Fangtong
4. Air transport system: One set of forced air transport combined air extraction fan (to extract harmful gases) model: 6 inches
5. Thermal insulation material: vacuum aluminum silicate + silk cotton double layer Model: 60K
6. Conveyor belt: Teflon mesh belt 1. Master switch: 20A
7. Transport motor: 800W (frequency converter regulating speed)
8. Governor: 500W (electronic stepless frequency converter speed control digital display speed operation)
9. Suction fan: CY-125 model
10. Ammeter: 50A set
Voltmeter: a set of 220V
12. Working voltage: 200V--220V(±5) three-wire system 50Hz
Effective light moment of ultraviolet light source: 150mm
The length of lamp tube is 460mm
UV ultraviolet sterilization tube 16 *20W UV lamp in the inner cavity longitudinal, upper, lower, left, right installation
The wavelength is 253.7nm, and the radiation intensity is over 160 mw/cm2 at a distance of 1 m.
Power equipment and precautions
Power supply: AC220V 3 Φ 2.35 KW 50 hz
Allowable range of voltage variation: ±5% of rated value
(But the operational range is ±10%)
(2) ZUI large load capacity: 2.35KW
(3) ZUI large current: 50A
(4) When placing the box body, the distance between it and the wall should be more than 100mm.
1. Basic information
1.1 Safety Instructions
Users should take all reasonable safety precautions and should seek professional advice before using if in doubt.
The instrument is designed for use by professionally trained personnel in a controlled environment.
The instrument is used in residential, commercial and light industrial environments in accordance with standard EN 50081-1.
The company does not undertake any unauthorized modification of this document
The quality of the instrument shall be guaranteed for 12 months from the date of first use or 15 months from the date of spontaneous delivery, on the basis of the first occurrence.
The instrument has passed inspection and testing, so there are no material and process defects.
This warranty is in lieu of any other warranty, express or implied.
In no event shall it be liable and liable for any special or consequential damages arising out of any breach of this Warranty.
The liability shall be limited to the repair or replacement of any defective parts arising on board or during ex works delivery.
There is no warranty for damage to instruments or components caused by misuse, misuse, accident, alteration, neglect, or unauthorized repair or installation.
Zui has the final decision on defect identification and cause.
After the parts have been repaired or replaced, the warranty under the warranty shall continue to be valid for 6 months from the original warranty period or the date of the spontaneous credit of the equipment, subject to the longer period.
The company reserves the right to make changes and improvements to its products, but has no obligation to perform improvements and installations on products already produced.
1.3 Parts Warranty
The supplied parts and materials have been inspected and tested to ensure that they are free from defects and defects and that they will work normally when properly installed and operated on the instruments manufactured.
The warranty period for components (excluding expendable components such as light sources, optical elements, friction cloth, etc.) is 6 months from the first delivery date.
This warranty is in lieu of any other warranty, express or implied.
In no event shall it be liable and liable for any special or consequential damages arising out of any breach of this Warranty.
The liability shall be limited to the repair or replacement of any defective parts arising on board or during ex works delivery.
There is no warranty for damage to components caused by misuse, misuse, accident, alteration, neglect, unauthorized repair or installation.
Zui has the final decision on defect identification and cause.
The company reserves the right to make changes and improvements to its products, but has no obligation to perform improvements and installations on products already produced.
1.4 Operating environment
The instrument is used in residential, commercial and light industrial environments in accordance with standards BS EN 50081-1 and BS EN50082-1
1.5 Climatic Environment
The company shall have the right to make changes and improvements to its products, but shall have no obligation to perform improvements and installations on the products already produced.
The instrument is operated under the following conditions:
< 2000 m elevation
Operating temperature: 13 ~ 30℃(56 ~ 86℉), relative humidity 25 ~ 75%
Storage temperature: 10 ~ 43℃(50 ~ 110℉), relative humidity 20 ~ 80%
The instrument can be placed in a standard operating environment to ensure consistency between sample humidification and actual wear test.
1.6 Electrical Information
This instrument meets the electrical requirements of EN 61010-1:2001 for measurement, control and laboratory use.
1.7 Installation type and pollution level
Install category Ⅰ
Pollution level 1
Founded in 2011, Shanghai Huitao is a team of experienced engineers and emerging design experts. The company focuses on R & D, design and production of high quality laboratory instruments for textile testing. Headquartered in Shanghai, the company provides high-quality testing instruments and high-quality professional services for companies, academic research institutions and testing institutions of various countries.
Shanghai Huitao continuously launched products to meet the experimental needs of the textile industry. It has advanced microclimate comfort test equipment, such as thermal manikin, thermal and humidity resistance tester, MMT and other test equipment. Meanwhile, it also provides air permeability tester, hydrostatic pressure tester and thermal protective clothing performance test equipment required for new product development. In addition, we have developed and produced many basic textile testing instruments, including washing color fastness tester, fabric abrasion tester, pilling tester, rubbing color fastness tester, ironing fastness tester and perspiration color fastness tester. These high-quality products are widely used in textile testing field. In order to meet the experimental needs of users, we also provide you with innovative and practical testing instruments. The products include fiber tester, yarn tester, fabric tester, carpet tester, geotextile tester and other related testing equipment.
The company sells our products through distributed distribution partners who provide high-quality products, services and support to our customers all over the world. All the products are in line with international quality standards and specifications, and can perform outstanding and accurate product performance.
