15921758826
15921758826
Shanghai Weitao automation equipment Co., Ltd
Contact person: Mr. Lu
Tel: 15921758826
Address: 2312 Weiqing East Road, Shanyang Town, Jinshan District, Shanghai
Detailed instructions
Hst-h6 heat sealing tester can conduct heat sealing test on flexible packaging materials under the set temperature, pressure and time, so as to find out the technological parameters of material heat sealing conveniently and quickly.
In line with QB/T 2358, ASTM F2029, YBB 00122003 standards.
The test instrument has the following characteristics:
Compact and reasonable structure, high system reliability;
Miniaturized design, convenient application;
Heat seal parameters controlled by microcomputer, test **;
Digital temperature control system, high precision temperature control;
International selection of devices, accurate and reliable data;
Technical index of HST-H6 heat seal tester:
Heat sealing temperature: room temperature ~ 300℃
Temperature control accuracy: ±0.2℃
Heat sealing time: 0.1 ~ 999.9s
Heat sealing pressure: 0.05 ~ 0.7mpa
Hot sealing surface: 150mm×10mm (customizable)
Air source pressure: 0.5mpa ~ 0.7mpa
Application range of test instrument
It is mainly applicable to the parameters such as heat sealing temperature, heat sealing time and heat sealing pressure of plastic film substrate, flexible packaging composite film, aluminum foil, etc.
Is the plastic flexible packaging manufacturers, quality inspection institutions laboratory and other departments of the ideal testing equipment.
Technical features of test instrument
1. Microcomputer control, LIQUID crystal display
2. Pneumatic double-sided heating, temperature, time and pressure three factors are controllable and adjustable
3. Upper and lower heat seal independent temperature control
4. Set foot switch and humanized structure design
Technical parameters of test instrument
1. Heat sealing temperature: room temperature -250℃, accuracy (±0.1℃)
2. Heat sealing time :0.01s ~ 999.9s
3. Heat sealing pressure: 0.05mpa ~ 0.7mpa
4. Heat sealing area :330mm×10mm [Different heat sealing areas can be customized]
5. Heat sealing heating form: double heating
6. Air source pressure :≤ 0.7mpa
7. Power supply: 220V 50Hz
Test instrument configuration
Main machine, micro printer, power cord
Note: Users provide their own air source
Safety instructions
Users should take all reasonable safety precautions and should seek professional advice before using if in doubt.
The instrument is designed for use by professionally trained personnel in a controlled environment.
The instrument is used in residential, commercial and light industrial environments in accordance with standard EN 50081-1.
The company does not undertake any unauthorized modification of this document
The quality of the instrument shall be guaranteed for 12 months from the date of first use or 15 months from the date of spontaneous delivery, on the basis of the first occurrence.
The instrument has passed inspection and testing, so there are no material and process defects.
This warranty is in lieu of any other warranty, express or implied.
In no event shall it be liable and liable for any special or consequential damages arising out of any breach of this Warranty.
The liability shall be limited to the repair or replacement of any defective parts arising on board or during ex works delivery.
There is no warranty for damage to instruments or components caused by misuse, misuse, accident, alteration, neglect, or unauthorized repair or installation.
Zui has the final decision on defect identification and cause.
After the parts have been repaired or replaced, the warranty under the warranty shall continue to be valid for 6 months from the original warranty period or the date of the spontaneous credit of the equipment, subject to the longer period.
The company reserves the right to make changes and improvements to its products, but has no obligation to perform improvements and installations on products already produced.
Founded in 2011, Shanghai Huitao is a team of experienced engineers and emerging design experts. The company focuses on R & D, design and production of high quality laboratory instruments for textile testing. Headquartered in Shanghai, the company provides high-quality testing instruments and high-quality professional services for companies, academic research institutions and testing institutions of various countries.
Shanghai Huitao continuously launched products to meet the experimental needs of the textile industry. It has advanced microclimate comfort test equipment, such as thermal manikin, thermal and humidity resistance tester, MMT and other test equipment. Meanwhile, it also provides air permeability tester, hydrostatic pressure tester and thermal protective clothing performance test equipment required for new product development. In addition, we have developed and produced many basic textile testing instruments, including washing color fastness tester, fabric abrasion tester, pilling tester, rubbing color fastness tester, ironing fastness tester and perspiration color fastness tester. These high-quality products are widely used in textile testing field. In order to meet the experimental needs of users, we also provide you with innovative and practical testing instruments. The products include fiber tester, yarn tester, fabric tester, carpet tester, geotextile tester and other related testing equipment.
The company sells our products through distributed distribution partners who provide high-quality products, services and support to our customers all over the world. All the products are in line with international quality standards and specifications, and can perform outstanding and accurate product performance.
