Moisture resistant microbial penetration tester

Scope of application: the linear expansion coefficient tester is used to test the low-temperature expansion performance of solid inorganic, organic materials, polymers, polymer materials, metal / nonmetal materials, rubber, plastic and metal products; the linear variable, linear expansion coefficient, volume expansion coefficient, rapid thermal expansion, softening temperature and their change curves of samples can be completed by hy4690 linear expansion coefficient tester.

Executive standard:

《1》 GB / t1036-2008 "determination of coefficient of linear expansion of plastics - quartz dilatometer method"

《2》 GB / t2572-2005 test method for average coefficient of linear expansion of fiber reinforced plastics

Features of the instrument:

1. Imported linear bearing transmission is adopted to realize the non friction transmission of expansion value, and the transmission accuracy and repeatability are excellent;

2. The heating rate is automatically set by computer program, the temperature control precision is 0.1 ℃, and the precision refrigeration heating system is equipped.

3. Computer automatically calculates expansion coefficient, volume expansion coefficient, linear expansion and rapid thermal expansion

4. Automatic calculation of compensation coefficient and automatic compensation, or manual correction (online).

5. Automatically record, store and print the data, print the temperature expansion coefficient curve; set the temperature interval freely, and the minimum distance is 0.1-1 ℃

6. The low temperature expansion coefficient tester is equipped with a computer interface, which can be connected with a general computer, and all test operations are completed by computer interface;

Experimental principle: this experimental method is to put the original length of the sample into the quartz dilatometer, and then insert the dilatometer into the constant temperature bath at different temperatures. After the temperature of the sample is balanced with the temperature of the constant temperature bath, and the indicator value of the instrument for measuring the length changes is stable, the reading is recorded, and the linear expansion coefficient of the sample can be calculated from the expansion value and shrinkage value of the sample.

Technical parameters:

Instrument model

HY4690

temperature range

0 ~ 200 ℃, - 30 ~ 200 ℃, - 40 ~ 200 ℃ (can be customized according to customer requirements)

control accuracy

±0.1℃

Measurement range of expansion value

±5mm

Expansion value resolution

0.1 ~ 1um automatic calibration range

Sample specification

(2 ~ 15) × (2 ~ 15) × (20 ~ 150) mm; cylindrical or square

System measurement error

±0.1-0.5%

supply voltage

220V±10﹪，0.5KW

Dimensions

550×550×1200mm

Instrument weight

1.3 warranty of components

The parts and materials supplied have been inspected and tested to ensure that they are free from defects and defects and will work properly when they are properly installed and operated on the manufactured instruments. The warranty period of parts (excluding consumable parts such as light source, optical element, friction cloth, etc.) is 6 months from the delivery date.

This guarantee is in lieu of any other warranty, express or implied. In any event, it shall be liable and liable for any special or indirect damages caused by breach of this warranty.

The responsibility is limited to the repair or replacement of any defective parts produced during on-board and factory delivery. There will be no warranty for damage to components caused by abuse, improper use, accident, change, neglect, unauthorized repair or installation. Zui has the final decision on the defect identification and the causes.

It reserves the right to make changes and improvements to its products, but has no obligation to carry out improvement and installation on the products already produced.

1.4 operating environment

The instrument is used in residential, commercial and light industrial environments in accordance with BS EN 50081-1 and BS EN 50082-1

1.5 climate environment

It has the right to change and improve its products, but has no obligation to carry out improvement and installation on the products already produced.

The instrument operates under the following conditions:

Altitude < 2000m

Operating temperature: 13 ～ 30 ℃ (56 ～ 86 ℃), relative humidity 25 ～ 75%

Storage temperature: 10-43 ℃ (50-110 f), relative humidity 20-80%

The instrument can be placed in the operation environment required by the standard, so as to ensure the operation consistency between the sample humidity adjustment and the actual wear test.

1.6 electrical information

The electrical requirements of this instrument comply with en 61010-1:2001, measurement, control and laboratory use.

1.7 installation type and pollution level

Installation category I

Pollution level 1

1.8 warning signs