15921758826
15921758826
Shanghai Weitao automation equipment Co., Ltd
Contact person: Mr. Lu
Tel: 15921758826
Address: 2312 Weiqing East Road, Shanyang Town, Jinshan District, Shanghai
This machine is suitable for wear resistance test of all shoelaces and eyelets. The shoelace is bent at a certain angle through the eyelet and pulled repeatedly under the standard load to test the wear resistance of the laces and eyelets. Six groups of samples can be tested at the same time without interference.
Function description of wearable tester for eyelet and Laces
Product specification: SATRA tm93
Group 6
Weight 455G ± 5g x6pcs
Counter LCD, 0 ~ 999, 999
Standard eyelet (1) made of brass, inner diameter 4.5mm
(2) Fiberboard: 5.0 ± 0.2mm
Stroke 76 ± 2 mm
The test speed is 100 ± 5cpm
Volume (dxh) 57 × 58 × 41cm
Weight (about) 60 kg (without weight)
Power supply 1 ∮, AC 220 V, 50 Hz, (according to country or specified)
1. Basic information
1.1 safety instructions
Users should take all reasonable safety measures and seek professional advice before use if in doubt.
The instrument is designed for use in controlled environments by trained personnel.
The instrument is used in residential, commercial and light industrial environments in accordance with the standard EN 50081-1
The company does not undertake any unauthorized modification
The quality assurance of the instrument for 12 months from the date of first use or 15 months from the date of delivery shall be based on the first occurrence. The instrument has passed the inspection and test, so there are no material and process defects. This guarantee is in lieu of any other warranty, express or implied. In any event, it shall be liable and liable for any special or indirect damages caused by breach of this warranty.
The responsibility is limited to the repair or replacement of any defective parts produced during on-board and factory delivery. There will be no warranty for damage to instruments or components caused by abuse, improper use, accident, change, neglect, unauthorized maintenance or installation. Zui has the final decision on the defect identification and the causes.
After the parts are repaired or replaced, the warranty within 6 months from the original warranty period or the date of spontaneous loan shall continue to be valid according to the longer warranty period.
It reserves the right to make changes and improvements to its products, but has no obligation to carry out improvement and installation on the products already produced.
1.3 warranty of components
The parts and materials supplied have been inspected and tested to ensure that they are free from defects and defects and will work properly when they are properly installed and operated on the manufactured instruments. The warranty period of parts (excluding consumable parts such as light source, optical element, friction cloth, etc.) is 6 months from the delivery date.
This guarantee is in lieu of any other warranty, express or implied. In any event, it shall be liable and liable for any special or indirect damages caused by breach of this warranty.
The responsibility is limited to the repair or replacement of any defective parts produced during on-board and factory delivery. There will be no warranty for damage to components caused by abuse, improper use, accident, change, neglect, unauthorized repair or installation. Zui has the final decision on the defect identification and the causes.
It reserves the right to make changes and improvements to its products, but has no obligation to carry out improvement and installation on the products already produced.
1.4 operating environment
The instrument is used in residential, commercial and light industrial environments in accordance with BS EN 50081-1 and BS EN 50082-1
1.5 climate environment
It has the right to change and improve its products, but has no obligation to carry out improvement and installation on the products already produced.
The instrument operates under the following conditions:
Altitude < 2000m
Operating temperature: 13 ～ 30 ℃ (56 ～ 86 ℃), relative humidity 25 ～ 75%
Storage temperature: 10-43 ℃ (50-110 f), relative humidity 20-80%
The instrument can be placed in the operation environment required by the standard, so as to ensure the operation consistency between the sample humidity adjustment and the actual wear test.
1.6 electrical information
The electrical requirements of this instrument comply with en 61010-1:2001, measurement, control and laboratory use.
1.7 installation type and pollution level
Installation category I
Pollution level 1
1.8 warning signs
Founded in 2011, Shanghai Huitao is a team of experienced engineers and emerging design experts. The company focuses on R & D, design and production of high quality laboratory instruments for textile testing. Headquartered in Shanghai, the company provides high-quality testing instruments and high-quality professional services for companies, academic research institutions and testing institutions of various countries.
Shanghai Huitao continuously launched products to meet the experimental needs of the textile industry. It has advanced microclimate comfort test equipment, such as thermal manikin, thermal and humidity resistance tester, MMT and other test equipment. Meanwhile, it also provides air permeability tester, hydrostatic pressure tester and thermal protective clothing performance test equipment required for new product development. In addition, we have developed and produced many basic textile testing instruments, including washing color fastness tester, fabric abrasion tester, pilling tester, rubbing color fastness tester, ironing fastness tester and perspiration color fastness tester. These high-quality products are widely used in textile testing field. In order to meet the experimental needs of users, we also provide you with innovative and practical testing instruments. The products include fiber tester, yarn tester, fabric tester, carpet tester, geotextile tester and other related testing equipment.
The company sells our products through distributed distribution partners who provide high-quality products, services and support to our customers all over the world. All the products are in line with international quality standards and specifications, and can perform outstanding and accurate product performance.
