Welcome toShanghai Weitao automation equipment Co., Ltdwebsite!


Hot search:

Moisture resistant microbial penetration tester


Hot news

contact us

Shanghai Weitao automation equipment Co., Ltd

Contact person: Mr. Lu

Tel: 15921758826

Address: 2312 Weiqing East Road, Shanyang Town, Jinshan District, Shanghai

Dynamic modulus tester

Dynamic modulus tester
Visits : 0
Editing time : 2020-10-21
Detailed introduction:

Dynamic modulus measuring instrument concrete dynamic modulus measuring instrument

Main USES:

The concrete concrete dynamic modulus tester/concrete dynamic elastic modulus tester is used to measure the resonance rate of concrete or mortar specimens under certain vibration mode, so as to calculate the concrete dynamic modulus.

Main parameters of the dynamic modulus tester:

1. Frequency measurement range: 100Hz -- 20KHz;

2. Transmitting frequency sensitivity: 1Hz;

3. Measurement error: & LT;


4. Measurement repeatability: 99%;

5. Output mode: 7-inch color LCD;

6. Input method: touch screen;

7. Data export methods: USB, WIFI.

Meet the standards:

GB/T 50082-2009 Standard for Testing Methods for Long-term Performance and Durability of Ordinary Concrete

DLT 5150-2001 Code for Hydraulic Concrete Tests

Jtge30-2005 Test Code for Cement and Cement Concrete for Highway Engineering

Main Features:

1. Compatible with multiple national standards, optional;

2. The parameters of the specimen are automatically saved when power is off, without tedious input;

3. The experimental report can be saved automatically, and exported one by one or in batches;

4. The device has a built-in large-capacity storage device, which can save millions of experimental reports;

5. Select 7-inch LCD touch screen as display and input, easy to operate and intuitive display;

6. The device is controlled by THE CPU of STMICRObe 32-bit Contex M4 kernel, with stronger performance, faster running speed and higher stability.

Main configuration:

1. One main engine

2. Send a probe;

Receiving probe one

3. Two fixed bases with probes

4. Probe fixed 2 irons

5. One power cord

6. 1 roll of printing paper

7. One copy of instruction and warranty card


The supplied parts and materials have been inspected and tested to ensure that they are free from defects and defects and that they will work normally when properly installed and operated on the instruments manufactured.

The warranty period for components (excluding expendable components such as light sources, optical elements, friction cloth, etc.) is 6 months from the first delivery date.


This warranty is in lieu of any other warranty, express or implied.

In no event shall it be liable and liable for any special or consequential damages arising out of any breach of this Warranty.


The liability shall be limited to the repair or replacement of any defective parts arising on board or during ex works delivery.

There is no warranty for damage to components caused by misuse, misuse, accident, alteration, neglect, unauthorized repair or installation.

Zui has the final decision on defect identification and cause.


The company reserves the right to make changes and improvements to its products, but has no obligation to perform improvements and installations on products already produced.

1.4 Operating environment


The instrument is used in residential, commercial and light industrial environments in accordance with standards BS EN 50081-1 and BS EN50082-1

1.5 Climatic Environment


The company shall have the right to make changes and improvements to its products, but shall have no obligation to perform improvements and installations on the products already produced.

The instrument is operated under the following conditions:

Elevation & lt;


Founded in 2011, Shanghai Huitao is a team of experienced engineers and emerging design experts. The company focuses on R & D, design and production of high quality laboratory instruments for textile testing. Headquartered in Shanghai, the company provides high-quality testing instruments and high-quality professional services for companies, academic research institutions and testing institutions of various countries.

Shanghai Huitao continuously launched products to meet the experimental needs of the textile industry. It has advanced microclimate comfort test equipment, such as thermal manikin, thermal and humidity resistance tester, MMT and other test equipment. Meanwhile, it also provides air permeability tester, hydrostatic pressure tester and thermal protective clothing performance test equipment required for new product development. In addition, we have developed and produced many basic textile testing instruments, including washing color fastness tester, fabric abrasion tester, pilling tester, rubbing color fastness tester, ironing fastness tester and perspiration color fastness tester. These high-quality products are widely used in textile testing field. In order to meet the experimental needs of users, we also provide you with innovative and practical testing instruments. The products include fiber tester, yarn tester, fabric tester, carpet tester, geotextile tester and other related testing equipment.

The company sells our products through distributed distribution partners who provide high-quality products, services and support to our customers all over the world. All the products are in line with international quality standards and specifications, and can perform outstanding and accurate product performance.