Moisture resistant microbial penetration tester

The test box is suitable for simulating the ultraviolet radiation and heat of sunlight. The test sample is subjected to ultraviolet irradiation and temperature in the machine. After a period of time, observe the degree of the sample's resistance to yellowing.

Complete machine accessories, can be used as a basic yellow resistance test, can also be used as aging testing machine and oven, showing a multi-purpose machine function.

Edit box structure

◆ Fixed rotary table for test piece: diameter 40, rotation speed 0 ~ 10R.p.m. (adjustable)

◆ Standard spare parts: 2 shed panels, observation Windows

◆ Material: internal SUS#304 stainless steel plate, external plastic powder spraying

◆ Test distance: 150~250mm(adjustable)

◆ Protection: No fuse overload protection. Weight of the machine: about 120Kg

Technical parameters:

◆ Temperature control mode: PID

◆ Temperature control range: RT---120℃

◆ Precision of thermostat: within 0.2 °

◆ Timer: 0.001 S-999h

◆UV Light source: 300W red line bulb type (original import)

Power: 4.5 KW

Model and size (D*W*H mm) editing

Studio dimensions External dimensions

DE - H400UA 500 * 500 * 600 1000 * 650 * 1170

Power installation and method editing

1. The power supply marked on the machine shall be used;

2. Pay attention to the wiring device, avoid trampling damage leakage, ensure external safety;

3. Connect the corresponding voltage socket (or replace fuse switch), turn ON the switch ON/OFF, and wait for the power indicator to light up, and then adjust the temperature by yourself.

1.3 Parts Warranty

The supplied parts and materials have been inspected and tested to ensure that they are free from defects and defects and that they will work normally when properly installed and operated on the instruments manufactured.

The warranty period for components (excluding expendable components such as light sources, optical elements, friction cloth, etc.) is 6 months from the first delivery date.

This warranty is in lieu of any other warranty, express or implied.

In no event shall it be liable and liable for any special or consequential damages arising out of any breach of this Warranty.

The liability shall be limited to the repair or replacement of any defective parts arising on board or during ex works delivery.

There is no warranty for damage to components caused by misuse, misuse, accident, alteration, neglect, unauthorized repair or installation.

Zui has the final decision on defect identification and cause.

The company reserves the right to make changes and improvements to its products, but has no obligation to perform improvements and installations on products already produced.

1.4 Operating environment

The instrument is used in residential, commercial and light industrial environments in accordance with standards BS EN 50081-1 and BS EN50082-1

1.5 Climatic Environment

The company shall have the right to make changes and improvements to its products, but shall have no obligation to perform improvements and installations on the products already produced.

The instrument is operated under the following conditions:

Elevation & lt;

2000m

Operating temperature: 13 ~ 30℃(56 ~ 86℉), relative humidity 25 ~ 75%

Storage temperature: 10 ~ 43℃(50 ~ 110℉), relative humidity 20 ~ 80%

The instrument can be placed in a standard operating environment to ensure consistency between sample humidification and actual wear test.

1.6 Electrical Information

This instrument meets the electrical requirements of EN 61010-1:2001 for measurement, control and laboratory use.

1.7 Installation type and pollution level

Install category Ⅰ

Pollution level 1

1.8 Warning labels